POM

Polyoxymethylene (polyformaldehyde) thermoplastic crystalline polymer. Known as the "super steel" or "steel", also known as polyoxymethylene. English abbreviation is POM. In general, the polymers obtained by formaldehyde polymerization are not high in polymerization degree and easy to be heated and depolymerization. [POM is a smooth, shiny hard and dense material, light yellow or white POM is white powder, usually opaque, coloring is good, the proportion of 1.41-1.43 g / cm3, molding shrinkage 1.2-3.0%, molding temperature is 170-200 DEG C, 2 hours drying conditions 80-90 C. The long-term heat resistance of POM is not high, but it can reach 160 DEG C in a short time. Among them, the homopolymerization of POM is higher than that of copolymerization POM over 10, but the long term heat resistant copolymerization of POM is about 10 higher than that of homopolymerization POM. It can be used for a long time in the temperature range from -40 to 100 centigrade. POM is easy to decompose, the decomposition temperature is 280 DEG C, and there is irritation and corrosive gas in the decomposition. Therefore, the die steel should be made of corrosion-resistant material. 1 paraformaldehyde is a solid formaldehyde with high formaldehyde content, which is solid granular and easy to store and transport. Can be turned into formaldehyde vapor in high temperature, easy to replace high concentrations of formaldehyde in various reactions, is conducive to the application of chemical and pharmaceutical chemical synthesis and other industrial fields, especially in the synthesis of material requires the use of anhydrous formaldehyde, widely used. Mainly in the following aspects: (1) pesticide synthesis of acetochlor and Butachlor and glyphosate; (2) coating: paint with synthetic high-grade cars; (3): synthetic resin urea formaldehyde resin, phenolic resin, polyacetal resin, melamine resin, ion exchange resin and adhesive (4; synthetic paper) paper reinforcing agent; (5): casting foundry remover, synthetic casting adhesive; (6): aquaculture fumigation disinfectant. (7) organic raw material: used in the preparation of pentaerythritol, three hydroxymethyl propane, glycerin, acrylic acid, methyl acrylate, methacrylic acid, N - hydroxy - acrylamide, alkyl phenol, methyl vinyl ketone, etc.. (8) other: medicine and sterilization

POM

Ordinary class

Grade Area Model Characteristic Purpose Product information[PDF]
Ordinary class Dupont 500T POM 500t is toughened, medium viscosity, acetal homopolymer resin, shock resistant, Similar to POM 100 injection molding. It can be used in parts that require noise reduction. General mechanical parts that require better toughness.
Ordinary class Dupont 500P 500p POM is a versatile medium viscosity acetal homopolymer injection molding. It improves the processing thermal stability, good mechanical properties and low VOC emission combination. General machine parts, gears, pull ups, cams. Material available for mechanical processing.
Ordinary class Dupont 100T High viscosity acetal homopolymer obtained from polyoxymethylene, 100T, toughened and excellent impact resistance. It is designed for high pressure places, highlighting toughness is required. Automotive, household appliances, sports, industrial engineering, electronic technology, and consumer products industry.
Ordinary class Dupont 100ST Super toughened, high viscosity acetal homopolymer, excellent impact resistance. It is designed for high stress components, and outstanding toughness is essential. Automotive, household appliances, sports, industrial engineering, electronic technology, and consumer products industry.
Ordinary class hoechst C9021 High rigidity / solvent / chemical resistance, good / alkali / fire resistance / water resistance / toughness / good hardness Electrical / electronic applications Automotive applications of electrical appliances / Engineering / / accessories
Ordinary class fpcc FM270 High flow and low mold fouling The snap, home appliances, electronic components and other small machine parts, zipper, gear, auto parts
Ordinary class fpcc FM090 Standard liquidity, low fouling Fastener, fasteners, fittings and accessories, household appliances, other injection parts, gear, electronic parts, auto parts, bearing
Ordinary class Ningxia Shenhua MC90 Good dimensional stability Low warpage / good rigidity, good impact resistance, and good formability Gear; engineering parts; general purpose; housing
Ordinary class Daniel Malaysia M90 standard Snap fastener, fittings and accessories, gear, electronic parts, automobile parts, household appliances, bearings and other injection parts.
Ordinary class POM-CeLCON M270 Low viscosity / high fluidity and short molding cycle Use: buttons, zippers, gear, electronic parts, automobile parts, household electrical appliances.
Ordinary class Japanese treasure CP15X Creep resistance It can also be widely used in automobile, office machinery, living materials and other fields
Ordinary class Japanese treasure M270-44 Standard / high flow and short molding cycle It can also be widely used in automobile, office machinery, living materials and other fields
Ordinary class Daniel Taiwan SW-01 Special lubricants, high performance, high slip Balanced characteristics - suitable for general injection molding products - high temperature resistance and moisture resistance
Ordinary class Daniel Malaysia M90-44 standard Gear; engineering parts; general purpose; housing
Ordinary class Asahi LZ750 Low friction coefficient; low viscosity; copolymer; high flowability; good wear resistance; lubrication Gears; engineering fittings; housings
Ordinary class Japanese treasure HC750 Low viscosity copolymer Gears; engineering fittings; housings
Ordinary class Dupont 100P POM 03 100P is a high viscosity acetal homopolymer for ease of use mold filling. POM POM 03 bell 100P offers a great combination of toughness and strength Improved machining thermal stability and productivity for injection molding and low VOC emissions. High stress parts, processing materials, plates, bars, tubes.
Ordinary class Asahi C4520 Copolymer; moderately viscous Gear; engineering parts; application in automobile field; general purpose; shell
Ordinary class Asahi C4513 Copolymer; good ultraviolet resistance; good weather resistance; medium viscosity Gears; engineering parts; internal parts of automobiles; housings
Ordinary class Asahi C5520 Copolymer; moderately viscous Gear; engineering parts; general purpose; housing
Ordinary class Korea long K300 Friction resistance / wear resistance, chemical resistance, heat resistance stability, dimensional stability It can also be widely used in automobile, office machinery, living materials and other fields
Ordinary class Korea engineering plastics 2010 Good dimensional stability; rigidity; high; high strength; homopolymer; impact resistance; high; good creep resistance; fatigue resistance; good toughness; high viscosity Gears; conveyors; fittings; engineering parts; fasteners; automotive applications; housings; bearings
Ordinary class Korea engineering plastics 3010 Good dimensional stability; rigidity; high; high strength; homopolymer; impact resistance; high; good creep resistance; fatigue resistance; good toughness; high viscosity Gears; conveyors; fittings; engineering parts; fasteners; automotive applications; housings; bearings
Ordinary class Korea engineering plastics FU-2015 Impact modification / impact resistance, high toughness, good / medium viscosity RoHS compliance injection molding
Ordinary class Korea engineering plastics F30-03 Low viscosity general injection molding (suitable for high flow products) It is suitable for multi cavity products - for thin wall products
Ordinary class Korea engineering plastics F20-03 Medium viscosity for general injection molding (standard grade) Balanced characteristics Apply to general injection molding products - high temperature and moisture resistance
Ordinary class Korea engineering plastics F20-02 Medium viscosity for general injection molding (standard grade) Balanced characteristics Apply to general injection molding products
Back to Top

Enhancement stage

Grade Area Model Characteristic Purpose Product information[PDF]
Enhancement stage Dupont 525GR Glass fiber reinforced material, 25% packing, by weight It has high strength, stiffness and high deflection temperature, excellent creep resistance and good notched impact properties. Mechanical parts requiring higher rigidity
Enhancement stage Dupont 500AF POM is a kind of "500af" medium viscosity acetal homopolymer containing 20% "PTFE" Teflon fiber. It is designed for low wear and / or low friction steel, itself, or other plastics. Gears, bushings, cams, and other wear resistant applications.
Enhancement stage Dupont 500CL POM is a kind of "500cl" medium viscosity acetal homopolymer containing chemical lubricants, designed for low wear and friction on metals. Machine parts requiring wear resistance.
Enhancement stage Dupont 500AL POM is a 500al medium viscosity acetal homopolymer containing an advanced lubrication design for low wear, low friction systems, and low noise for metals and plastics. Automotive, household appliances, sports, industrial engineering, electronic technology, and consumer products industry.
Enhancement stage Dupont 570 Universal medium viscosity acetal homopolymer injection molding. It improves the processing thermal stability, good mechanical properties and low VOC emission combination. Automotive, household appliances, sports, industrial engineering, electronic technology, and consumer products industry.
Enhancement stage Japanese treasure GH-25 Glass fiber 25% reinforced high strength and high rigidity Suitable for multi cavity products - for thin wall products
Enhancement stage Japanese treasure GB-25R Low warpage / glass bead, 25% filler, press weight Mechanical parts requiring higher rigidity
Enhancement stage Japanese treasure CH-20 Electrical conductivity / friction resistance - 20% carbon fiber reinforced General mechanical parts requiring higher rigidity.
Enhancement stage Japanese treasure CH-10 Abrasion resistance - 10% carbon fiber reinforced General mechanical parts requiring higher rigidity.
Back to Top

Hair pin level

Grade Area Model Characteristic Purpose Product information[PDF]
Hair pin level Shanghai sufa SF-500GF Enhanced stage / White / Black / fiber 15/25/30/40% General mechanical parts requiring higher rigidity.
Hair pin level Shanghai sufa SF-M270 Ordinary / ecru / White / Black Use: buttons, zippers, gear, electronic parts, automobile parts, household electrical appliances.
Hair pin level Shanghai sufa SF-M90 Ordinary / ecru / White / Black Snap fastener, fittings and accessories, gear, electronic parts, automobile parts, household appliances, bearings and other injection parts.
Hair pin level Shanghai sufa SF-500P General class / high rigidity / high impact / color / White / Black General machine parts, gears, pull ups, cams. Material available for mechanical processing.
Back to Top