Home > Solvay > PESU > Non enhancement stage

PESU

PES (polyether sulfone resin) is a transparent amber amorphous resin. It has excellent heat resistance, good dimensional stability, and good chemical resistance. In addition, PES shows excellent reliability for rapid temperature changes, and has good reliability in long-term use at high temperature. PES is widely used because of its excellent formability and excellent properties. The heat: the heat distortion temperature at 200 ~ 220 DEG C, continuous use temperature is 180 to 200 DEG UL DEG C temperature index 180.

Veradel®PESU

Chemical resistance and thermal deformation

Veradel PESU (polyether sulfone) has good chemical resistance and high thermal deformation temperature, and it is very suitable for food service applications. This resin is also an inherent flame retardant for electronic components and testing equipment 

main features

  • The thermal deformation temperature is 204 degree C (399 degree F)
    Good chemical resistance
    Excellent electrical performance
    transparent


Typical application

  • Automotive lighting
    Electrical and electronic components
    coating
    Cooker
    Food and Beverages
    Low pressure water filtration membrane
    Food and beverage processing films
    Industrial filter membrane

PESU
Non enhancement stage Enhancement stage Coarse powder grade

Non enhancement stage

Grade Area Model Characteristic Purpose Product information[PDF]
Non enhancement stage Solvay 3600 Transparent, very high mixed melt flow Mixing, injection molding
Non enhancement stage Solvay 3500 Transparent micro yellow, high melt fluidity, used for composite injection molding
Non enhancement stage Solvay 3300 PREM Transparent, water vapor resistant, boiling water and inorganic acids, medium melt flow grade for general injection molding. General injection molding in the field of food service
Non enhancement stage Solvay 3200 Transparent, conform to FDA, low melt flow for extrusion and injection molding Composite; extrusion; injection molding
Non enhancement stage Solvay A-301 Transparent, conform to FDA standard, medium melt flow, used for injection molding injection molding
Non enhancement stage Solvay A-702 Transparent, very high mixed melt flow Mixing, coating applications, adhesives
Non enhancement stage Solvay A-201 Transparent, conform to FDA, low melt flow for extrusion and injection molding Composite; extrusion; injection molding
Non enhancement stage Solvay A-101 Transparent, conform to FDA, high melt flow for extrusion and injection molding Extrusion; film extrusion; sheet extrusion
Back to Top

Enhancement stage

Grade Area Model Characteristic Purpose Product information[PDF]
Enhancement stage Solvay 3330GF 30% glass fiber, opaque, high melt flow for injection molding injection molding
Enhancement stage Solvay 3320GF 20% glass fiber, opaque, high melt flow for injection molding injection molding
Enhancement stage Solvay AG-330 30% glass fiber, opaque, high melt flow for injection molding Electronic parts, measuring appliances, cooking utensils, low pressure permeable membranes
Enhancement stage Solvay AG-320 20% glass fiber, opaque, injection molding, high melt rate Electronic parts, measuring appliances, cooking utensils, low pressure permeable membranes
Back to Top

Coarse powder grade

Grade Area Model Characteristic Purpose Product information[PDF]
Coarse powder grade Solvay 3000P Coarse powder used in coatings, high viscosity Coating, casting film, coating, solution treatment, spraying
Coarse powder grade Solvay 3100P Coarse powder used in coatings, medium viscosity Cast film; coating; solution treatment
Coarse powder grade Solvay 3400P Coarse powder is used in coatings with low viscosity Coating; solution treatment; spraying
Back to Top