P-1710

English Name: Polysulfone (PSU) polysulfone is amber transparent solid material, high hardness and impact strength, non-toxic, heat resistance, cold resistance, good aging resistance, can be used for a long time under -100--175 degrees. Specific gravity: 1.25-1.35 g / cubic centimeter molding shrinkage: 0.5-0.7% molding temperature: 290-350 DEG C, drying condition: 130-150 hours, 4 hours

Udel®PSU

Transparent plastics have high strength and rigidity

MetInfo enterprise content manager system | MetInfo CMS
Udel PSU (polysulfone) is a rigid, high strength, semi ductile transparent plastic. It has higher heat resistance and better hydrolytic stability than polycarbonate. When exposed to steam and other disinfection techniques, it maintains good mechanical properties.
 
Udel PSU is good at many fluid processing applications and has successfully replaced brass for over 20 years in pressurized hot water applications. It exhibits low creep under sustained load at high temperature and is able to withstand continuous exposure to Hot Chlorinated water.


Main features

  • HDT was 174 degree C (345 degree F)
    high strength
    Good practical toughness
    Excellent hydrolytic stability
    transparent
    To color


Typical application

  • Faucet assembly
    Hot water fittings
    Manifold
    Medical equipment
    Membranes: hemodialysis, water treatment, biological treatment, food and beverages, gas separation