PEI

Polyetherimide, Polyetherimide PEI[1], amber transparent solid, do not add any additives have low inherent flame retardancy and smoke, the oxygen index is 47%, combustion of UL94-V-0 grade, the density is 1.28~1.42g/cm3. PEI has a high temperature stability, even if it is non reinforced PEI, it still has good toughness and strength. Therefore, the use of PEI's superior thermal stability can be used to fabricate high temperature heat resistant devices. It has excellent mechanical properties, electrical insulation, radiation resistance, high and low temperature resistance and wear resistance, and can also be transmitted through microwave. PEI also has good flame retardancy, chemical resistance and electrical insulation characteristics. The glass transition temperature is very high, up to 215 degrees centigrade. PEI also has very low shrinkage and good mechanical properties. Adding glass fiber, carbon fiber or other fillers can improve the purpose of modification. It can also form heat-resistant polymer alloy with other engineering plastics, and can be used for a long time at the working temperature of -160 ~ 180 DEG C.
Because of its excellent comprehensive balance performance, PEI has been successfully applied to the industrial sectors such as electronics, electrical machinery and aviation, and is used as a metal substitute for traditional products and cultural daily necessities. Fabrication of fiber optic connectors using PEI instead of metal can optimize component structure, simplify manufacturing and assembly steps, and maintain more accurate dimensions. Used in the automotive field, such as sensor to produce high temperature connectors, high power lights and lights, control the external temperature of the automobile cabin (air temperature sensor) and the control of air and fuel mixture temperature sensor (effective combustion temperature sensor). Can also be used as ground glassjoint finestiller high vacuum pump impeller, high temperature lubricating oil erosion 180 degrees in the operation of the (socket), mirror - the anti fog lamp lighting.

PEI

Ordinary class

Grade Area Model Characteristic Purpose Product information[PDF]
Ordinary class Basic innovation plastics (USA) 1010 Transparent, reinforced flow polyether imide (PEI) with TG 217c. Consistent with RoHS. Compliance with UL94, V0 and 5VA listing. FDA food contact standards in the United States and the European union. Electrical appliances, electronics: connectors, switches Automotive aircraft parts: car fuses, special battery cases
Ordinary class Basic innovation plastics (USA) 1010-1000 High flowability, high temperature resistance, high strength and high modulus Electronics, motors and air / vacuum pump impellers / sensors
Ordinary class Basic innovation plastics (USA) 1000 Injection molding unreinforced standard Electronic / motor and aviation / fiber optic connectors
Ordinary class Basic innovation plastics (USA) 1000- 1000 Transparent, reinforced flow polyether imide (PEI) with TG 217c. Consistent with RoHS. Compliance with UL94, V0 and 5VA listing. FDA food contact standards in the United States and the European union. Electronic / motor and aviation / automotive / high temperature connections / high power light and indicator / control car compartment external temperature sensor
Ordinary class Basic innovation plastics (USA) 1000P Standard flow 217C (TG) powder at 350 microns. Ecological integration. Multilayer circuit board / flexible circuit board / engine insulation wire material Copier, split Claw / off heat gear / missile radome / heating roller bearing
Back to Top

Enhancement stage

Grade Area Model Characteristic Purpose Product information[PDF]
Enhancement stage Basic innovation plastics (USA) 2200 20% glass fiber filled standard flow 217C (TG). Eco integration, compliance with UL94, V0 and 5VA listing. NSF 51 is listed, WRAS certified color. Automotive / Plumbing / Plumbing / drinking water
Enhancement stage Basic innovation plastics (USA) 2100 10% glass fiber filled standard flow 217C (TG). Eco integration, compliance with UL94, V0 and 5VA listing. NSF 51 is listed, WRAS certified color. Automotive / Plumbing / Plumbing / drinking water
Enhancement stage Basic innovation plastics (USA) ATX200-1100 20% glass fiber filled, standard flow 217C (TG) internal mold release. Eco integration, compliance with UL94, V0 and 5VA listing. Electrical appliances, electronics: connectors, switches Automotive aircraft parts: car fuses, special battery cases
Enhancement stage Basic innovation plastics (USA) 2310 30% glass fiber filled, enhanced flow 217C (TG). Eco integration, compliance with UL94, V0 and 5VA listing. Multilayer circuit board / engine insulated wire material / copier separating Claw / off heat gear / heating roller bearing
Enhancement stage Basic innovation plastics (USA) 2300 30% glass fiber filled, standard flow 217C (TG) internal mold release. Eco integration, compliance with UL94, V0 and 5VA listing. Multilayer circuit substrate / engine insulation wire material Copier separating Claw / break heat gear / heating roller bearing
Back to Top

Hair pin level

Grade Area Model Characteristic Purpose Product information[PDF]
Hair pin level Shanghai sufa SF-1000GF Enhancement grade / glass fiber filling / amber / black /10/20/30 fiber% Automotive / Plumbing / Plumbing / drinking water
Hair pin level Shanghai sufa SF-1000 Transparent, reinforced flow polyimide Electrical appliances, electronics: connectors, switches, automotive aircraft parts: car fuses, special battery boxes
Back to Top